Personal tools
User menu

Difference between revisions of "Porsche 928 LH Replacement Rev 2"

From Francois Louw

Jump to: navigation, search
(To Do list)
 
Line 14: Line 14:
 
__TOC__
 
__TOC__
  
==To Do list ==
+
=To Do list =
 
Here is where I list all the mistakes I need to fix and the optimisations that needs to be done. This will focus primarily on the hardware side of the board because the software will in the end be 99% the same as the prototype version.
 
Here is where I list all the mistakes I need to fix and the optimisations that needs to be done. This will focus primarily on the hardware side of the board because the software will in the end be 99% the same as the prototype version.
  
Line 48: Line 48:
 
*''Change serial port emulation to HID usb communication''
 
*''Change serial port emulation to HID usb communication''
  
==Updates done so far 1 April 2013==
+
=Updates done so far 1 April 2013=
  
 
SO far I have done major reworking to the second revision of the PCB. All the changes that has been made are marked on the to do list in ''italics'' and the still to be done is marked in '''bold'''.
 
SO far I have done major reworking to the second revision of the PCB. All the changes that has been made are marked on the to do list in ''italics'' and the still to be done is marked in '''bold'''.
Line 66: Line 66:
 
After more testing with prototypes I will make a batch of the next revision boards (around 10) and then text to make sure that there are no errors.
 
After more testing with prototypes I will make a batch of the next revision boards (around 10) and then text to make sure that there are no errors.
  
==Upadtes 3 April 2013==
+
=Upadtes 3 April 2013=
  
 
Ok, so almost everything is done one the PCB. I require the pinout and PCB footprint of the 25pin connector for the S3 generation.
 
Ok, so almost everything is done one the PCB. I require the pinout and PCB footprint of the 25pin connector for the S3 generation.
Line 76: Line 76:
 
I think I will try to find a connector that can fit on either the 25 or 35 pin footprint to make life easier.
 
I think I will try to find a connector that can fit on either the 25 or 35 pin footprint to make life easier.
  
==Revised 20 Apr 2013==
+
=Revised 20 Apr 2013=
  
 
Of, here are a few of the things done:
 
Of, here are a few of the things done:

Latest revision as of 12:00, 24 July 2014